Safe Operation; Technical Specifications - stayer SC250W Manual De Instrucciones

21.Special tools as possibly required
Tools as required are standard or included with the
accessories of the machine.

22. Safe operation

1.Keep working area clean. Unorderly working areas
and benches are susceptible of causing damages.
2.Take into account the surroundings of the working
area. Do not expose tools to rain. Do not use tools
at humid or wet locations. Keep working area well
illuminated. Do not use tools in the presence of
inflammable liquids or gases.
3.Protect against electrical shocks. Avoid contacts of
the body with earthed or chassis-earthed surfaces
(e.g. pipes, radiators, heaters, refrigerators, etc.).
4.Keep other persons away. Do not allow that other
persons, especially children, who are not linked to the
work, touch the tool or extensible cables, and keep
them away form the working area.
5.Store tools that are not being used. When not in use,
tools should be stored at a dry and closed location out
of the reach of children. Do not place anything on top
of the machine, or store the machine start backwards.
6.Do not force the tool. The tool operated better and
safer at the assigned characteristic for which it has
been designed.
7.Choose the right tool. Do not force a small tool to carry
out the work that corresponds to a heavy tool. Do not
use tools for purposes for which they have not been
designed; for instance, do not use circular saws for
cutting the trunks of trees or the branches thereof.
8.Dress suitably. Do not use loose-fitting garment or
jewellery articles that may get caught by moving
parts. The use of nonslip footwear is recommended
for working at outside locations. For long hair use
protective caps.
9.Use safety equipment. Use protective goggles. Use
face protector or mask to avoid dust if the cutting
operations may generate it.
10.Connect the dust-extraction equipment. Should
devices for the connection thereof to dust extraction
and collection equipments be provided, make sure that
they are in fact connected and adequately used.
11.Do not mistreat the cables. Never pull the cable to
disconnect it from the socket. Keep the cable away
from heat, oil and cutting edges.
12.Secure operations. When possible, use fastening
clasps or clamps for workbenches for fastening the
workpiece. This is safer than using your hands.
ENGLISH
58
13.Do not excessively extend our radius of operation.
Always keep a firm stand on the ground and preserve
your equilibrium.
14.Service tools carefully. Keep cutting tools sharpened
and clean for a better and safer operation thereof.
Follow the instructions for greasing and the changing
of accessories. Periodically check extensible cables
and replace them if they are damaged. Keep grips dry,
clean and free of grease and oil.
15.Disconnect the tools. Disconnect tools form the grid
supply when not in use, before repairing and when
changing accessories such as saw blades, drilling bits
and blades.
16.Remove setting keys and adjustable spanners.
Make it your custom to check that setting keys and
adjustable spanners are removed from the tool before
it is operated.
17.Avoid unintentional starting. Make sure that the
switch is in the "open" position when plugging the
machine into the socket.
18.Use extensible cables for outside use. When using
the tool at an outside location, only use extensible
cables for outside use that are marked for this purpose.
19. Be alert. Look at what you are doing, use common
sense and do not work with the machine when you
are tired.
20.Check damaged parts. Before using a tool again, it
should be carefully checked so as to determine that it
will operate suitably and be apt for the operation which
has been assigned to it. Examine alignment, fixing
and tightening of mobile and fixed parts, breakage of
parts, mounting, and other conditions that may affect
its operation. A damaged guard or other part should
be s u i t a b l y repaired or replaced by an authorized
technical service unless anything else is stated in the
instructions manual. Have faulty switches replaced by
an authorized technical service. Do not use the tool if
the switch does not switch on or switch off.
21.Warning: The use of any accessories or supplements
other than one recommended in this instructions
manual may generate personal damages.
22.Have the tool repaired by qualified personnel.
This electrical tool complies with the appropriate
safety requirements. Repairs should be carried out
by qualified personnel only using original spareparts;
otherwise, a considerable risk could be generated for
the user.

23.Technical specifications

Measure to be kept by saw blades (En847):
Diameter of the saw blade: 254 mm, Thickness of the
base disk: 1.8 – 2.8 mm, Hole diameter: 30 mm
Information on noise and vibration
58