Things You Should Know - Stanley B 251/10/50 Manual De Instrucciones

página de 181

/ 181
Contenido
Tabla de contenido
Marcadores

Tabla de contenido

Idiomas disponibles

Preserve this handbook for future reference

1. PRECAUTIONS

An ACOUSTIC PRESSURE value of 4 m. corresponds

to the ACOUSTIC POWER value stated on the yellow

label located on the compressor, minus 20 dB.

THINGS TO DO

● The compressor must be used in a suitable

environment (well ventilated with an ambient

temperature of between +5°C and +40°C) and

never in places affected by dust, acids, vapors,

explosive or flammable gases.

● Always maintain a safety distance of at least 4

meters between the compressor and the work area.

● Any coloring of the belt guards of the compressor

during painting operations indicates that the distance

is too short.

● Insert the plug of the electric cable in a socket of

suitable shape, voltage and frequency complying

with current regulations.

● For 3-phase versions, have the plug fitted by a

qualified electrician according to local regulations.

When starting the compressor for the first time,

check the correct direction of rotation and that this

matches the direction indicated by the arrow on the

belt guard (versions with plastic protection) or on the

motor (versions with metal protection).

● Use extension cables with a maximum length of 5

meters and of suitable cross-section.

● The use of extension cables of different length and

also of adapters and multiple sockets should be

avoided.

● Always use the switch of the pressure switch to

switch off the compressor or use the switch of the

electric panel for models equipped with this. Never

switch off the compressor by pulling out the plug in

order to avoid restart with pressure in the head.

● Always use the handle to move the compressor.

● When operating, the compressor must be placed

on a stable, horizontal surface to guarantee correct

lubrication.

● Position the compressor at least 50 cm from the

wall to permit optimal circulation of fresh air and to

guarantee correct cooling.

NOT

THINGS

TO DO

● Never direct the jet of air towards persons, animals

or your body. (Always wear safety goggles to protect

your eyes against flying objects that may be lifted by

the jet of air).

● Never direct the jet of liquids sprayed by tools

connected to the compressor towards the

compressor.

● Never use the appliance with bare feet or wet hands

or feet.

● Never pull the power cable to disconnect the plug

from the socket or to move the compressor.

● Never leave the appliance exposed to adverse

weather conditions.

● Never transport the compressor with the receiver

under pressure.

● Do not weld or machine the receiver. In the case of

faults or rusting, replace the entire receiver.

● Never allow inexpert persons to use the compressor.

Keep children and animals at a distance from the

work area.

● This appliance is not intended for use by persons

(including children) with reduced physical, sensory

or mental capabilities, or lack of experience and

knowledge, unless they have been given supervision

or instruction concerning the use of the appliance by

a person responsible for their safety.

● Children should be supervised to ensure that they do

not play with the appliance.

● Do not position flammable or nylon/fabric objects

closed to and/or on the compressor.

● Never clean the compressor with flammable liquids

or solvents. Check that you have unplugged the

compressor and clean with a damp cloth only.

● The compressor must be used only for air

compression. Do not use the compressor for any

other type of gas.

● The compressed air produced by the compressor

cannot not be used for pharmaceutical, food or

medical purposes except after particular treatments

and cannot be used to fill the air bottles of scuba

divers.

● Never use the compressor without guards (belt

guard) and never touch moving parts.