Logitech X-220 Manual De Instalación página 4

Setting up your Logitech® X-220 speakers
Important: For your safety, set up the system before plugging it into a power source.
1. Before attaching the cables to the subwoofer, position the two front satellite speakers on either side of your
computer. The right front speaker is the control center for your system, so you will want to place it within easy
reach. Depending on where you place your speakers, adjust them to direct the sound toward you.
For best sound quality, place the subwoofer on the floor beneath your desk. Be sure to allow for adequate
ventilation around it.
2. Connect the DIN plug from the front right speaker to the subwoofer as shown on the previous page. Carefully align
the pins before inserting the plug.
3. A. If you have a PC:
• Plug the green audio input cable from the right speaker into the speaker output on your PC.
B. If you have a video game console (PlayStation®, PlayStation ® 2, Xbox™, or GameCube®):
• Connect the green plug from the audio input cable to
the green jack on the included game console adapter.
• Connect the red and white RCA audio cables from your
video game console to the RCA audio jacks on the game
console adapter.
4. Plug the subwoofer's power cord into an electrical outlet.
Mounting your speakers to a wall
Your Logitech X-220 speaker satellites are wall mountable. Swivel the satellite base to
desired position, and use the notch to hang your speaker on appropriate wall anchors.
Enjoying your Logitech® X-220 speakers
Access these controls on the right front speaker:
Power/Standby
Toggles between power on and standby mode.
System Volume
Adjusts the overall system volume.
Headphone Jack
When headphones are used with your X-220 system, the speakers will mute automatically for private listening.
Headphone volume is controlled by the soundcard on your computer.
Subwoofer Volume
Located on the subwoofer. Use to adjust subwoofer volume (bass level).
3
English
Notch