Information about noise level and
vibrations
The values were measured in accordance with EN 60745.
ASR 18-S:
Sound pressure level L
= 95.9 dB (A).
pA
Sound power level L
= 106.9 dB (A).
wA
Inaccuracy of measuring K = 1.5 dB (A)
WARNING! The use of the tool generates noise.
Use a suitable hearing protection!
The value of vibrations (sum of vectors in three directions) deter-
mined pursuant to EN 60745 a
Inaccuracy of measuring K = 1.5 m/s
ASR 18 HT-S:
Sound pressure level L
= 87 dB (A).
pA
Sound power level L
= 98 dB (A).
wA
Inaccuracy of measuring K = 1.5 dB (A)
WARNING! The use of the tool generates noise.
Use a suitable hearing protection!
The value of vibrations (sum of vectors in three directions) deter-
mined pursuant to EN 60745 a
Inaccuracy of measuring K = 1.5 m/s
The emission values specified (vibration, noise) were measured in
accordance with the test conditions stipulated in EN 60745 and are
intended for machine comparisons. They are also used for making
preliminary estimates regarding vibration and noise loads during
operation.
The emission values specified refer to the main applications for
which the power tool is used. If the electric power tool is used for
other applications, with other tools or is not maintained sufficient-
ly prior to operation, however, the vibration and noise load may be
higher when the tool is used.
Take into account any machine idling times and downtimes to esti-
mate these values more accurately for a specified time period. This
may significantly reduce the load during the machine operating
period.
= 15.74 m/s
2
h
2
= 13.12 m/s
2
h
2
Certificate of Conformity
ASR 18-S; ASR 18 HT-S:
We declare that the device meets requirements of the following
standards and directivesc.
Safety:
EN 60745-1; EN 60745-2-2
Directive 98/37/ES
Electromagnetic compatibility:
EN 55014-1; EN 55014-2
Directive 2004/108/EC
2013
Narex s.r.o.
Chelčického 1932
470 01 Česká Lípa
Certificate of Conformity
AN-UNI C:
We declare that the device meets requirements of the following
standards and directivesc.
Safety:
EN 60335–1; EN 60335–2–29
Directive 2006/95/EC
Electromagnetic compatibility:
EN 55014–1; EN 55014–2;EN 61000–3–2; EN 61000–3–3
Directive 2004/108/EC
2013
Narex s.r.o.
Chelčického 1932
470 01 Česká Lípa
Changes are reserved
English
Antonín Pomeisl
CEO of the company
01.08.2013
Antonín Pomeisl
CEO of the company
01.08.2013
23