Hit And Crushing; Cuts And Lacerations; Fire - CAMPAGNOLA MC Serie Manual De Uso Y Mantenimiento

Here follows the description of the risks left in the steps of:
• routine function
•
• maintenance
• cleaning.

4.13.1 HIT AND CRUSHING

• Do not touch the machine moving parts.
• This risk is present when the machine protections have been removed.
•
technical interventions (service or repair work), could cause dangerous situations. Therefore, before such
interventions it is necessary to discharge the pneumatic circuit by releasing all air pressure.

4.13.2 CUTS AND LACERATIONS

The risk of cuts and lacerations is above all due to the operator's approaching the machine if the protections of
the moving parts (such as bavel gears, etc.) have been removed.
• Before power-supplying the machine, check there are no maintenance interventions in progress.
!
ATTENTION
sources.
!
ATTENTION
entirely the responsibility of the end-user to evaluate possible additional risks or dangerous situations.

4.13.3 FIRE

In case of defects or anomalies the plastic material used (wires, cases, etc.) is self-outputting and complies with
the regulations in force.
•
user's Country and with the inner rule of the site/plant.
•
DANGER
Campagnola Srl