Installation; Transporting And Moving The Packed Machine; Packing And Unpacking - CAMPAGNOLA MC Serie Manual De Uso Y Mantenimiento

5.

INSTALLATION

!
ATTENTION
5.1

TRANSPORTING AND MOVING THE PACKED MACHINE

!
ATTENTION
Before any transport operation, check that the fork-lift capacity is adequate to carry the load. After positioning the
forks in the right pallet positions, slowly lift the item without making any sharp movements.
Do not stop for any reason in the transport area or climb onto the machine packing during the fork-lift movements.

5.1.1 PACKING AND UNPACKING

To protect and avoid damages during the transport, the engine-driven compressor is usually packed on a wooden
pallet with wedges and a carton cover, locked by two rounds of strong plastic band.
The information and pictograms necessary for the transport are printed on the packing.
When receiving the engine-driven compressor, after removing the packing upper parts, it is necessary to check
that no damages occurred during the transport.
In case of damages due to the transport, please send a written claim together with photos of the damaged parts
to Campagnola srl. within and not later than 8 days after receiving the goods.
Carry the engine-driven compressor by means of a fork-lift the closer you can to the installation place, then carefully
remove the packing, in order not to damage it, according to the following instructions:
•
• remove the protective carton.
NOTE!
The machine can be left on the pallet to make eventual movements easier.
Campagnola Srl