Jam Out There HX-HP303 Manual Del Usuario página 3

Ocultar thumbs Ver también para Out There HX-HP303:
Tabla de contenido

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

  • MEXICANO, página 14
SET UP
CHARGING YOUR EARPHONES
The "Out There" headphones are powered by a
rechargeable battery. The headphones come pre-
charged; however, for optimal playtime, make sure to
charge before first use.
A – Unwrap the charging cable and plug the micro
USB end into the charging port on the headphones.
B – Connect the larger USB plug to your computer
or a powered USB AC adapter. An AC adapter is not
included in the box, but you can use the one for your
cell phone or pick one up next time you're at the store.
C – When the LED flashes red, it indicates that the
battery is low and it's time to plug in and recharge.
Charge for about 2 hours to get up to 17 hours of play
time; while charging, the light will stay solid red. Once
fully charged, the LED light will turn off.
*Remember to turn off the ANC feature when not
in use or when charging your headphones. This will
help ensure the most efficient charge time and longer
battery life.
USE
A – TURN ON YOUR HEADPHONES
Long press the "play/pause" button for 3 seconds to
turn on your headphones.
B – CONNECTING TO A DEVICE
Once turned on, the headphones will immediately
search for a device to pair to; the LED will blink red
and blue alternately. Enable Bluetooth on your device.
From the Bluetooth menu, select "Out There." When the
device and Out There are connected, you will hear a
tone and the LED will turn solid blue.
Once paired, your device and headphones will find
each other every time, as long as your device's
Bluetooth is on. If you're connecting to a computer,
you may have a few more steps on that end.
You'll have to get that information from the
computer company.
Depending on your device, you may be prompted to
enter a pairing code. If so, use "0000" as the code.
Holding down the "X" and "O" buttons at the same
time, for 5 seconds, will disconnect a paired device.
EN
2hrs
You may also connect your device to Out There using
an aux cord. When plugged in, the light will turn
solid red.
When using an auxiliary cord, you will have to
play and pause the music from your device, not
your headphones.
Out There
Out
There
17hrs
...3s
0000
0000
...0.5s
3

Publicidad

Tabla de contenido
loading

Tabla de contenido