Master Appliance Varitemp VT-750C Manual De Instrucciones página 4

Important Safety Instructions
capacity. We recommend
they be listed by Under-
writers Laboratories (UL)
in the U.S.A. or (CSA)
Canadian Standards
Association in Canada and
be suitable for outdoor
use. Cords marked for
outdoor use are also
suitable for indoor use.
17) Don't abuse cordset.
Never pull by cord to
remove from electrical
outlet or carry tool by cord.
18) Don't remove adjustable
stand. When not hand
held, place tool on a level
surface. Position cordset
so it does not cause
tipping.
Operating Instructions
Your Varitemp ® is a heavy-
duty, industrial-quality heat
gun. You can do more heating
jobs faster iwth this heat gun
because of its high power and
air flow ratings.
This product provides a fast
flow of heated air for
applicaitons such as activating
adhesives, bending and
forming plastics, curing
epoxies, deburring plastics,
defrosting frozen coils, drying
negatives and parts, heating
solids and liquids, loosening
nuts and bolts, removing floor
titles and putty, repairing vinyl,
shrinking tubing and
packaging, softening,
materials and stripping paint.
It's your dependable answer,
"Wherever a fast, protable
heat is the need."
(cont'd)
19) Keep a fully-charged fire
extinguisher close at hand.
20) Do not leave heat gun
unattended while running
or cooling down.
21) Stay alert. Do not operate
tool when you are tired.
Use common sense and
watch what you are doing.
22) Store properly. Do not
store while hot. Store in a
dry, high or locked-up
location. Keep out of the
reach of children.
23) Always unplug tool before
performing any
maintenance. When
servicing, use only Master
Appliance brand
replacement parts. We
The proper amount of heat for
each application is dependent
upon the adjustment of
the heat adjustment control,
the distance of the nozzle from
the work surface and the
length of time that heat is
applied to the work surface.
Before performing any
application, we recommend
that you experiment with a
piece of scrap material. Use
care in approaching the work
until you find the proper
combination of heat
adjustment, control distance
from the work surface, and the
heat application time.
Use a gentle back and forth
motion when applying heat
unless it is found that a
concentrated heat is desired.
4
recommend that all
maintenance be performed
by a qualified repair
technician who is
experienced in the repair
of electric tools, a qualified
service organization, or
our repair staff.
24) WARNING:
THIS PRODUCT,
WHEN USED FOR SOLDERING
AND SIMILAR APPLICATIONS,
PRODUCES CHEMICALS KNOWN
TO THE STATE OF CALIFORNIA
TO CAUSE CANCER AND BIRTH
DEFECTS OR OTHER
REPORODUCTIVE HARM.
Send product to:
Master Appliance Corp.
Attn: Repair Department
2420 - 18th Street
Racine, WI 53403
When heat gun is used in an
enclosed container, such as a
shrink tunnel or special
enclosure, ambient air must be
allowed to pass into the heat
gun and there must be an
outlet of equal size for the
heated air to pass out of the
enclosure also. Total enclosure
will cause damage or possible
failure to the heat gun due to
the extreme heat generated.