Storage/Overwintering; Wear Parts; Disposal - Oase BioTec ScreenMatic2 18000 Instrucciones De Uso

Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

- EN -
8

Storage/overwintering

The unit is protected from frost:
The unit can be operated as long as the water temperature does not go below +4 °C.
The deeper areas of the pond have a water temperature of approx. +4 °C in winter and are essential for the
fish. By taking the following measures it is possible to reduce the cooling effect on the water of the circulation
by the filter system:
• Position the pump nearer to the surface of the water so that only colder water closer to the surface of the
pond enters the pump.
• Insulate the return pipes from the filter system into the pond.
• Do not allow water to flow into the pond via a water course.
The unit is not protected from frost:
Take the unit out of operation at water temperatures below +8° C or, at the latest, when freezing temperatures
are to be expected.
• Drain the unit as far as possible, clean thoroughly and check for damage.
• Empty all hoses, pipes and connections as far as possible.
• Leave the slide valves open.
• Cover the filter container to prevent the penetration of rain water.
• Protect pipes and slide valves that are in contact with water from frost.
9

Wear parts

• Foam filters
• Substrate tubes
• ScreenMatic screen
10

Disposal

N O T E
Do not dispose of this unit with domestic waste.
• Render the unit unusable beforehand by cutting the cables and dispose of the unit via the return
system provided for this purpose.
26

Publicidad

Tabla de contenido
loading

Este manual también es adecuado para:

Biotec screenmatic2 24000Biotec screenmatic2 38000

Tabla de contenido