Beurer BM 44 Instrucciones De Uso página 28

Measurement Max. permissible standard deviation
inaccuracy according to clinical testing:
systolic 8 mmHg /diastolic 8 mmHg
Dimensions L 94 mm x W 122 mm x H 53 mm
Weight Approx. 442 g
(without batteries, with cuff)
Cuff size 22 to 30 cm
Permissible oper- + 10 °C to + 40 °C, ≤90 % relative air
ating conditions humidity (non-condensing)
Permissible stor- - 20 °C to + 55 °C, ≤90 % relative air
age conditions humidity, 800 –1050 hPa ambient pressure
Power supply
4 x 1,5 V
Battery life For approx. 600 measurements, depend-
ing on the blood pressure level and/or
pump pressure
Accessories Instruction for use, 4 x 1.5 V AA batteries,
storage pouch
Classification Internal supply, IPX0, no AP or APG,
continuous operation, type BF applied
part
The serial number is located on the device or in the battery
compartment.
AA batteries
28
Technical information is subject to change without notifica-
tion to allow for updates.
• This unit is in line with European Standard EN 60601-1-2
(In accordance with CISPR 11, IEC 61000-4-2, IEC 61000-
4-3, IEC 61000-4-8) and is subject to particular precau-
tions with regard to electromagnetic compatibility (EMC).
Please note that portable and mobile HF communication
systems may interfere with this unit.
• This device is in line with the EU Medical Devices Directive
93/42/EEC, the "Medizinproduktegesetz" (German Medi-
cal Devices Act) and the standards EN 1060-1 (non-inva-
sive sphygmomanometers, Part 1: General requirements),
EN 1060-3 (non-invasive sphygmomanometers, Part 3:
Supplementary requirements for electro-mechanical blood
pressure measuring systems) and IEC 80601-2-30 (Medi-
cal electrical equipment – Part 2 – 30: Particular require-
ments for the safety and essential performance of auto-
mated non-invasive blood pressure monitors).
• The accuracy of this blood pressure monitor has been
carefully checked and developed with regard to a long
useful life. If using the device for commercial medical pur-
poses, it must be regularly tested for accuracy by appro-
priate means. Precise instructions for checking accuracy
may be requested from the service address.