TFA 35.1087 Instrucciones De Uso página 5

TFA_No_35.1087_Anl_8_sprach
Indoor weather station
Operation
• Open the battery compartment and insert two batte-
ries 1.5 V AAA, polarity as illustrated. The unit is now
ready to use.
• By pressing the DOWN button the temperature unit
can be changed from °C to °F.
• To enter calendar mode, press MODE button. The date
is displayed.
• To enter alarm mode, press 2 x MODE button. The
alarm time is displayed.
Setting Mode
• Press MODE button for 2 sec. to enter the respective
setting mode and select all settings one after the other.
• When the digits are flashing set the desired time by
pressing the UP/DOWN button. Hold and press the
button for a fast count.
A. Setting of Time
Press MODE button (2 sec.)
Select Time Hours by pressing UP/DOWN button
Press MODE button
Select Time Minutes by pressing UP/DOWN button
Press MODE button
Exit setting mode
B. Setting of Calendar
Press MODE button
Enter Calendar mode
Press MODE button (2 sec.)
Select Date Year by pressing UP/DOWN button
Press MODE button
Select Date Month by pressing UP/DOWN button
Press MODE button
Select Date Year by pressing UP/DOWN button
Press MODE button
Exit setting mode
8
25.02.2010 9:07 Uhr
t
Seite 5
Indoor weather station
C. Setting of Alarm
Press 2 x MODE button
Enter Alarm mode
Press MODE button (2 sec.)
Select Alarm time Hours by pressing UP/DOWN button
Press MODE button
Select Alarm time Minutes by pressing UP/DOWN button
Press MODE button
Exit setting mode
Activate/turn off Alarm
• To activate/turn off the alarm function, press UP
button in alarm mode. The alarm symbol appears or
disappears on the current time display.
• Press any button to stop the alarm.
Snooze function
• Once the alarm starts to ring, you can activate the
snooze function by pressing the SNZ button. The alarm
symbol flashes and the alarm will be interrupted.
MAX/MIN values:
• Press the MAX/MIN button and the highest tempera-
ture and humidity values are displayed (MAX).
• Press the MAX/MIN button again, the display shows the
lowest values.
• A reset of the max./min. values is only possible by a
reinstallation of the unit.
Backlight
• Press the LIGHT button to light up the display for
8 seconds.
Weather symbol
• The instrument has no atmospheric pressure sensor.
The weather symbol is based on the changes of humi-
dity values.
t
9