Osd Cctv Menu Controls - Urmet 1092 Manual De Usuario

AUTOMATIC ADJUSTMENT BUTTON (AUTO) [3]
Available in "PC" mode only.
ADJUSTMENT BUTTONS (◄►) [4-5]
These are used to select the various input signals and to select control functions.
In "AV" mode, they directly control speaker volume.
Press "◄" or "►" to decrease or increase the value of the parameter.
SELECTION/CONFIRMATION BUTTON (SELECT) [6]
This is used to display the input signal selection menu. It is used to select and deselect the menu and submenu items.
This setting is used to select the signal source to be displayed.
Press "◄" or "►" to select among the options "PC", "AV1", "AV2" and "HDMI".
IMPORTANT NOTE
Select "AV1 o AV2" to use CCTV devices.
OSD MENU BUTTON [7]
This is used to access and quit the OSD (On-Screen Display) menu.
HDMI INPUT [9]
This connector allows the connection of HDMI video devices.
PC SIGNAL INPUT (VGA) [10]
PC input.
PC AUDIO INPUT (PC AUDIO) [11]
Jack socket audio input.
AUDIO INPUTS (AV AUDIO) [12]
RCA socket audio inputs.
VIDEO INPUTS (AV1 - AV2 INPUT) [13] [15]
These BNC connectors are used to connect the video signal.
VIDEO OUTPUT (AV1 - AV2 OUTPUT) [14] [16]
These BNC connectors allow to draw the video signal coming from "AV2 INPUT" (13-15) and send it to another video
input (such as, for example, another monitor or a DVR).
2.2

OSD CCTV MENU CONTROLS

Button (7) can be used to access menus and submenus and to define control functions.
Press button (7), the following screen will appear:
Procedure
Press "SELECT" to select the various menus and submenus.

Use "◄" and "►" to adjust.

Press "SELECT" again to confirm.

To quit the menu or submenus, press repeatedly "MENU".

DS1092-062B 15