SLV Elektronik BIMA I Instrucciones De Servicio página 3

ENGLISH
OPERATING MANUAL FOR
LUMINAIRE FOR 3-PHASE RAIL 230V
LUMINAIRE FOR 1-PHASE RAIL 230V
BIMA I / II
Read this short manual carefully and keep it accessible for further
reference!
SAFETY MESSAGES
Disregard of the safety messages may lead to danger of life, burning or
fire!
• Installation, mounting or works on the electrical connection may only be
carried out by an approved electrician.
• The product may not be modified or converted.
• Do not hang or fasten anything on the product, especially no decoration.
• Do not cover the product - provide free air circulation.
• In case of a malfunction you may NOT touch the product or operate it
further. Disconnect the product from the power supply by an external
switch or by the fuse.
A malfunction exists when:
• visible damages appear.
• the product does not work properly (e.g. flickering).
• smoke, steam or crackling sounds appear.
• smell of burning is recognisable.
• an overheating is recognisable (e.g. by discolouration of adjacent
surfaces).
Operate the product only after maintenance and examination by an
approved electrician!
• This product is not intended to be used by children. Ensure that children do
not suffer any harm e.g. by burns from hot surfaces or by electrical shock.
Additional safety messages are indicated by this symbol:
USE AS DIRECTED
This product serves exclusively lighting purposes and may:
• only be used with a voltage of 230V ~50Hz.
• only be installed according to safety class II (two).
• only be operated when firmly mounted on a stable, even and tilt-fixed
surface.
• only be operated on normally or not flammable surfaces.
• only be used in dry condition,
• not in damp or dirt-endangered rooms.
• not in areas of high air humidity.
• not be exposed to strong mechanical loads or to strong contamination.
OPERATION
It is the responsibilty of the user to ensure the electrical and thermal
compatibility between the rail system and the luminaires connected to it.
The safety of the complete system is only assured permanentely, when all
connection between electrical components are seated tightly. Check all electrical
connections on a regular basis(every three months). Tighten these if
necessary(turn off power before!).
The distance between the light source and the illuminated surface must be
0,5m
at least . Pay special caution to easily inflammable objects (e.g. curtains,
fabrics, foliage, etc.).
MAINTANANCE AND CARE
Light source
Exchange the light source always before it reaches its lifespan, to avoid
personal injuries, or damages of the luminaire or other objects.
Disconnect the product from the power supply, before you exchange the
light source. Let the light source cool down before replacement.
Use only light sources that are suitable for the product. Suitable light
sources are indicated on the type label.
• Suitable light sources: QPAR51, GU10, 50W max.
• Replacing the light source
see figure C.
• Insert the new light source with a slight-turn to the right.
Care
Disconnect the product from the power supply and let it cool down, before
you clean the product.
• Clean the product on a regular basis using a slightly moistened, soft and fluff-
free cloth. Please also note additional supplied notes on maintanance and
care.
.
STORAGE AND DISPOSAL
Storage
• The product must be stored in a dry and clean environment. Do not strain
the product mechanically during storage.
After a damp or soiling storage the product may only be installed after
checking its condition by an approved electrician.
Disposal (European Union)
• Do not dispose the product with the regular household waste! Products
marked with this sign must be disposed according to the directive(WEEE,
2003/108) on electrical and electronic devices at local collection points for
such devices!
INSTALLATION
(only by an approved electrician)
Switch off the mains or respectively the connection lead before doing any
works!
Use only parts, which are supplied with the product or are described as
accessories!
Inspect the product for loose parts inside the housing. When there are
loose parts inside the housing and these are not explicitly described the
product may not be installed or operated.
Use the supplied fastening material only when it is suited for the
installation background. If this is not the case use only fastening material
suiting the installation background.
Unpacking
• Carefully take the product out of the packaging removing any transport
safeguards.
• Before disposal of the packaging material make sure that all components
of the product are removed.
Installation place
• The product is solely suited for installation on a ceiling.
• Note the security advice on the distance to the illuminated surface in the
chapter OPERATION.
• The surface of the luminaire may get very hot depending on the utilized
light source. This symbol, , indicates hot surfaces on a luminaire.
When using halogen light sources the luminaire may only be installed and
operated in a minimum height of 2,50m, outside of the arm's reach. Always
use an existing handle when adjusting the direction of the luminaire.
Installation steps (read completely before installation)
• Install the luminaire as shown in the figure.
• Operate this fitting only with the corresponding rail-system.
• Note the manual of the rail-system.
• Switch the rail system dead before attaching the fitting.
• Do not use force when attaching the fitting.
Installation 1-phase adapter (143431/32/41/42)
see figure A.
Installation 3-phase adapter (152231/32/41/42)
see figure B.
• Inserting the light source
see figure C.
• Insert the new light source with a slight-turn to the right.
Check if the product functions properly and is securely fixed!
art.-no. 143431/32/41/42 152231/32/41/42 © 19.12.2011 SLV Elektronik
GmbH, Daimlerstr. 21-23, 52531 Übach-Palenberg, Germany, Tel. +49
(0)2451 4833-0
Technical Details are subject to change.