Electrical Installation; Water Installation - DURAVIT SensoWash 22265900 Serie Instrucciones De Montaje

Electrical installation

Power supply
Max. rated power
Circuit breaker
RCCB
Protection type
Protection class
Position of electrical connection
180
90 90
Pre-installation
> Lay a permanent power supply line:
Please observe the position of the electrical connec-
tion
Leave at least 800 mm of feed cable exposed
> Install circuit breaker
Connect a separate upstream circuit breaker
Connect an upstream residual current device (RCD)
separating all poles
33
Connecting the cable (Diagram 33)
> Please observe the L, N and PE conductors.
35
Installing junction box (Diagram 35)
> Fix the junction box in the Wall-mounted WC in the
designated place.
SensoWash_MAL_WWC+Montageset#100691_56918/15.10.2
220 – 240 V ~ 50/60 Hz
1.65 kW
I = 16 A
N
I = 30 mA
N
IP X4
1

Water installation

Cold water DN 10 (⅜")
Water pressure 0.07 - 0.75 MPa
(0.7 - 7.5 bar)
Water hardness max. 2,4 mmol/l
NOTE!
> Install a water water softener with water
hardness ≥ 2.4 mmol/l (≥ 14° dH and/or
24° fH).
DANGER!
Health risk and potential product damage.
> Supply the Shower WC with cold drinking water from the
main water system.
> Do not connect any waste water, grey water, industrial
water, sea water or other untreated or semi-treated
water.
Pushing the water hose through the ductwork into
6
the front-wall element (Diagram 6)
NOTE! Avoiding any malfunctions!
> Only use the reinforced water hose from the
installation kit.
10
Shutting off the water supply (Diagram 10)
NOTE! Avoiding water damage.
> Shut off the water supply prior to the water
installation.
7