Mounting And Removing The Lens Cap; Perform The Final Checks; Visual Inspection - Olympus PT-034 Manual De Instrucciones

Mounting and Removing the Lens Cap

Fit the lens cap onto the lens
ring as shown in the figure. Be
sure to remove the lens cap
before shooting.

Perform the final checks.

Visual Inspection

After sealing the Case, check the sealing part of front and rear lid
visually to confirm that the O-ring is not twisted or out of the groove
and that no foreign matter has been caught. Also check that there
are no fractures and cracks on the main unit.
CAUTION : • Hairs, fibers, and other small particles are not easy to
see, but they may allow entry of water, so look very
closely. Also take extra care to ensure there are no
fractures and cracks on the main unit.
E-22