GE AGF05 Manual Del Propietario E Instrucciones De Instalación página 11

Read completely, then follow step-by-step.
1
Window Requirements
s
These instructions are for a standard double-
hung window. You will need to modify them for
other types of windows.
s
The air conditioner can be installed without
the sliding panels if needed to fit in a narrow
window. See the window opening dimensions
to the right.
s
All supporting parts must be secured to firm
wood, masonry or metal.
s
The electrical outlet must be within reach of the
power cord. Do not use an extension cord.
2
Storm Window Requirements
A storm window frame will not allow the air
conditioner to tilt towards the outside and will
keep it from draining properly. To adjust for this,
attach a piece of wood to the stool.
1/2" higher
than frame
Storm window
frame
3
Prepare the Window and the Case
Cut the window sash seal to the proper length.
A
Peel off the backing and attach the seal to the
underside of the window sash.
Sash
Wood
Stool
Seal
22" to 36"
(with sliding panels)
" min.
18 3 ⁄
4
(without sliding panels)
WOOD PIECES—
WIDTH: 2"
LENGTH: Long enough to fit inside the window
frame.
THICKNESS: To determine the thickness, place a
piece of wood on the stool to make it 1/2" higher
than the top of the storm window frame.
Attach securely with nails or screws provided by
the installer.
Insert the sliding panels into the guides of the
B
air conditioner and attach them to the case
with 8 Type B screws, 4 on each side.
Use Type B screws.
13" min.
11