English - Milwaukee M18 FCHS Manual Original

TECHNICAL DATA
Chain saw
Production code
No-load chain speed
Bar length max.
Usable cutting length
Battery voltage
Weight according EPTA-Procedure 01/2014 (Li-Ion 2,0 Ah ... 12,0 Ah)
Recommended Ambient Operating Temperature
Recommended battery types
Recommended charger
Chain oil tank capacity
Noise information
Measured values determined according to EN 60745. Typically, the A-weighted noise levels of the tool are:
Sound pressure level (Uncertainty K=3dB(A))
GB
Sound power level (Uncertainty K=3dB(A))
Wear ear protectors!
Vibration information
Vibration total values (triaxial vector sum) determined according to EN 60745
Vibration emission value a
Uncertainty K=
WARNING
The vibration and noise emission level given in this information sheet has been measured in accordance with a standardized test given in
EN 60745 and may be used to compare one tool with another.It may be used for a preliminary assessment of exposure.
The declared vibration and noise emission level represents the main applications of the tool. However if the tool is used for di erent
applications, with di erent accessories or poorly maintained, the vibration and noise emission may di er. This may signi cantly increase
the exposure level over the total working period.
An estimation of the level of exposure to vibration and noise should also take into account the times when the tool is switched o or when
it is running but not actually doing the job. This may signi cantly reduce the exposure level over the total working period.
Identify additional safety measures to protect the operator from the e ects of vibration and/or noise such as: maintain the tool and the
accessories, keep the hands warm, organization of work patterns.
Wear ear protectors. Exposure to noise can cause hearing loss.
WARNING!
Read all safety warnings, instructions, illustrations and
speci cations provided with this power tool. Failure to follow
the warnings and instructions may result in electric shock, re and/
or serious injury.
Save all warnings and instructions for future reference.
GENERAL CHAIN SAW SAFETY WARNINGS
Keep all parts of the body away from the saw chain when
the chain saw is operating. Before you start the chain
saw, make sure the saw chain is not contacting anything.
A moment of inattention while operating chain saws may cause
entanglement of your clothing or body with the saw chain.
Always hold the chain saw with your right hand on the rear
handle and your left hand on the front handle. Holding the
chain saw with a reversed hand con guration increases the risk of
personal injury and should never be done.

English

18
hmax
M18 FCHS
4678 37 01 ...
... 000001-999999
12,4 m/s
16" (406,4 mm)
380 mm
18 V
5,3 ... 6,4 kg
-18°C ... +50°C
M18B, M18HB12
M12-18, M1418 C6
200 ml
77,67 dB(A)
97,69 dB(A)
4,96 m/s
2
1,5 m/s
2
Hold the chain saw by insulated gripping surfaces only,
because the saw chain may contact hidden wiring. Saw
chains contacting a „live" wire may make exposed metal parts of
the chain saw „live" and could give the operator an electric shock.
Wear eye protection. Further protective equipment for
hearing, head, hands, legs and feet is recommended.
Adequate protective equipment will reduce personal injury from
ying debris or accidental contact with the saw chain.
Do not operate a chain saw in a tree, on a ladder, from a
rooftop, or any unstable support. Operation of a chain saw in
this manner could result in serious personal injury.
Always keep proper footing and operate the chain saw only
when standing on xed, secure and level surface. Slippery
or unstable surfaces may cause a loss of balance or control of the
chain saw.
When cutting a limb that is under tension, be alert for
spring back. When the tension in the wood bres is released the
spring loaded limb may strike the operator and /or throw the chain
saw out of control.
M18 FCHSC
4743 51 01 ...
... 000001-999999
12,4 m/s
12" (304,8 mm)
280 mm
18 V
5,2 ... 6,3 kg
-18°C ... +50°C
M18B, M18HB12
M12-18, M1418 C6
200 ml
77,67 dB(A)
97,69 dB(A)
4,96 m/s
2
1,5 m/s
2