Truper Expert SDS MAX MADE-10NX Manual De Instrucciones página 8

Chisel angle adjustment
• The chisel can be adjusted in 12 positions, depending on
the job to be done.
• Insert the chisel into the chuck as shown on page 7.
• Push forward and turn the ring (A) to change the chisel
to the desired position.
• Release the ring to return it to its position and engage the
chisel.
Additional information
• SDS accessories require freedom to move within the drill
bit, which causes eccentricity when the tool is unloaded.
However, the accessory automatically centers itself during
operation, without affecting drilling accuracy.
• When new, the tool requires a 5-hour working time to
reach maximum efficiency.
8
ENGLISH
Start Up
A