Attaching The Front-Panel Insulation; Attaching The Custom-Door-Panel Brackets - Dacor Modernist DRR24 Serie Instrucciones De Instalación

Installation instructions

12. Attaching the Front-Panel Insulation

• Attach the insulation to the front of refrigerator door. (Ensure the mounting position is
correct.)
1. Center the door panel and the insulation as shown in the graphic below.
2. Attach the insulation 4 in. (102 mm) from top of the door. (See the graphic.)
4" (102 mm)
Insulator

13. Attaching the Custom-Door-Panel Brackets

Attach the panel brackets to the top and bottom of the panel.
Custom Panel: STS
Drive 10 screws each to the top and bottom brackets as shown in the graphic. (The other
holes on each side of the bracket are for a different application.)
(FH) M4x14 20 ea
UPP : 10 ea / LOW : 10 ea
Screw Hole
44 English