Descargar Imprimir esta página

Add Engine Oil - Briggs & Stratton ELITE Serie Instrucciones De Uso

7500w
Ocultar thumbs Ver también para ELITE Serie:

Publicidad

Idiomas disponibles

Idiomas disponibles

WERPRODUCTS
BEFORE
STARTING
THE
ENGINE
Add Engine Oil
* Place generator
on a level surface.
CAUTION
, Refer to engine manual for oil fill information.
, Damage to equipment
resulting from failure to follow this
instruction
will void warranty.
• Refer to engine owner's manual and follow oil
recommendations
and instructions.
NOTE:
Check oil often during engine break-in. Refer to
engine owner's manual for recommendations.
NOTE:
The generator
assembly rotates on a prelubricated
and sealed ball bearing that requires
no additional
lubrication
for the life of the bearing.
Add Fuel
NOTE:
This gasoline engine
is certified
to operate
on
gasoline. Exhaust
Emission Control
System: EM (Engine
Modifications).
WARNING
WHEN
ADDING
FUEL
Turn generator
OFF and let it cool at
least
2
minutes before
removing fuel cap. Loosen cap slowly to relieve pressure in
tank.
Fill fuel tank outdoors.
DO NOT overfill tank.Allow
space for fuel expansion.
Keep fuel away from sparks, open flames, pilot lights, heat, and
other ignition sources.
DO NOT light a cigarette
or smoke.
Use clean, fresh, regular UNLEADED
fuel with a
minimum
of 85 octane.
DO NOT use fuel which
contains
Methanol.
DO NOT
mix oil with fuel.
2.
Clean area around fuel fill cap, remove cap.
3.
Slowly add regular unleaded fuel to fuel tank. Be careful
not to overfill.Allow
about 1.5" of tank space for fuel
expansion (Figure 3).
JN
NNNNF"-._'Z--'-._'f_----JN,'--"-.._NNF"-._'NN,
-"...--J,'*_NNNNNNNNNNNN._*_'F"
JNNf-_.Jf-_.._NNNNNNNNNNZ--"_-_,
4.
Install fuel cap and wipe up any spilled fuel.

Publicidad

loading

Este manual también es adecuado para:

030210