Cembre SD-15P-ECO Manual De Uso Y Mantenimiento página 9

5. REPLACING THE SPINDLE
For augers having a Ø 16 mm shank, the "MND 1" spindle must be interchanged with the standard
"MND" spindle.
Replace the spindle as follows:
– Remove the detachable guard (21) (see § 4.1.2).
– Remove the auger (see § 4.1.1).
– Turn the fi xed guard (23) and remove from the spindle, exposing the spindle shaft (15).
– By means of the 4 mm allen key supplied with the machine, remove grubscrew (18).
– Remove circlip (16) and locating pin (17).
– Slide the spindle from the shaft (13).
6. MAINTENANCE
Before servicing or removing any parts, stop the engine and allow it to cool.
Always remove the spark plug cap from the spark plug when servicing the engine
to prevent accidental starting.
Periodic inspections are essential for the proper functioning of the engine;
refer to "KAWASAKI" manual provided with the machine for the safe use of the
engine and for further requested maintenance operations.
6.1) Routine maintenance of the machine
6.1.1) Lubrication
(Depending on ambient conditions and use) periodically lubricate the return spring shafts, pro-
ceeding as follows:
– Remove two guard knobs (22).
– Remove the detachable guard (21) and the springs (25).
– Carefully wipe the shafts (24) using a clean cloth soaked in kerosene.
– Lubricate the shafts with a general purpose oil.
– Re-assemble the springs, detachable guard and the two guard knobs (22).
9
(See Fig. 1 and 2)
ENGLISH