Dremel 100 Instrucciones De Funcionamiento Y Seguridad página 25

1600A011JA.qxp_100 200 3000 4/12/17 12:55 PM Page 25
Not all speed settings can be achieved on 100 and 200 series tool. For certain applications,
a variable speed tool is required.
Speed Settings: 2 (5,000 - 8,000 RPM)
* Speed for light cuts, Caution - burning on deep grooves.
• Depending on cutting direction relative to grain.
Catalog
Number
9901, 9902, 9903,
9904, 9905, 9906,
9912
9909, 9910, 9911
Catalog
Number
612, 615, 617, 618
640, 650, 652, 654
Catalog
Number
83142, 83322,
83702, 84922,
85422, 85602,
85622
Catalog
Number
516
500
EZ541GR
Aluminum oxide grinding stones (orange/brown)
Catalog
Number
541, 903, 911, 921,
932, 941, 945, 952,
953, 954, 971, 997,
8153, 8175, 8193,
8215
Speed Settings (Continued)
8 (22,000 - 27,000 RPM) 10 (28,000 - 35,000 RPM)
Tungsten Carbide Cutters
Soft Hard Laminates
Wood Wood /Plastics
10 8
- -
High Speed Router Bits
Soft Hard Laminates
Wood Wood /Plastics
10* 8•
Silicon Carbide Grinding Stones (blue/green)
Soft Hard Laminates
Wood Wood /Plastics
- -
Abrasive Wheels / Points
Soft Hard Laminates
Wood Wood /Plastics
4-6 4-6
4-6 4-6
- -
Soft Hard Laminates
Wood Wood /Plastics
10 10
4 (9,000 - 15,000 RPM)
Aluminum,
Steel
Brass, etc.
4 10 6
- - -
Aluminum,
Steel
Brass, etc.
- - -
Aluminum,
Steel
Brass, etc.
6 10 4
Aluminum,
Steel
Brass, etc.
- 8 6
- 6-8 4-6
- 6-8 4-6
Steel Aluminum,
Brass, etc.
- 8 4
6 (16,000 - 21,000 RPM)
Shell/
Ceramic Glass
Stone
8 8-10 8-10
8 8-10 8-10
Shell/
Ceramic Glass
Stone
- - -
Shell/
Ceramic Glass
Stone
6 10 10
Shell/
Ceramic Glass
Stone
- - -
- - -
- - -
Shell/
Ceramic Glass
Stone
6 10 -
25