Panasonic WH-ADC0309G3E5 Instrucciones De Funcionamiento página 11

Hydrokit aire-agua + tanque
Tabla de contenido

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

  • MEXICANO, página 30
Operation/settings to be done only by the authorised dealer/specialist.
Dealer
Operation/settings to be done by the authorised dealer/specialist or user.
User
User
Weekly timer setting
Promotes energy saving by allowing you to set up to 6
programmes in any given day.
Lights up if Timer operation is selected
ON Timer
OFF Timer
1 Press
to enter the timer setting mode.
2 Press
or
to select your desired day.
3 Press
to confirm your selection.
4 "1" will be blinking, press
programme 1.
5 Press
to select ON or OFF timer.
6 Press
or
to select your desired time.
You can set
Temperature Thermo Shift setting.
7 Press
to confirm programme 1. The selected
day will be highlighted with ▼.
• After 2 seconds, the display will move to the
next programme. Repeat steps 4 to 7 to set
programmes 2 to 6.
• During timer setup, if no button is pressed within
30 seconds, or if the
that moment is confirmed and timer setup is ended.
To check current timer programme
1 Press
to enter timer mode and press
to enter day setting.
2 Press
or
until your desired day is shown,
press
to confirm your selection.
3 Press
or
to check the set programmes.
Note:
• You may set the timer for each day of the week (Monday to Sunday) with 6 programmes per day.
• When the system is switched on by the timer, it will use the previously set temperature to control the water outlet
temperature.
• The same timer programme cannot be set on the same day.
• You may also select 2 or more days with the same timer setting.
F569727_SS0814-1.indb 11
F569727_SS0814-1.indb 11
Indicates the next timer operation
programme
Programme number in a day
Indicates the next timer
operation day
Day to be selected
to set
,
,
and the Water
is pressed, the setting at
Process Black
Process Black
To modify current timer programme
or add new timer programme
1 Perform steps 1 to 7 of "Weekly timer
setting" to modify existing timer programme, or
add any timer programme.
To cancel current timer programme
1 Press
to enter day.
2 Press
or
until your desired day is shown,
press
to enter programme setting.
3 Press
or
until your desired programme is
shown.
Press
to cancel the programme and ▼ will
disappear.
To disable/enable Weekly Timer
• To disable weekly timer setting, press
press
.
• To enable previous weekly timer setting, press
then press
.
, then
,
11
21/08/2014 10:54:17 AM
21/08/2014 10:54:17 AM

Publicidad

Tabla de contenido
loading

Este manual también es adecuado para:

Wh-ud03ee5Wh-ud05ee5Wh-ud07fe5Wh-ud09fe5

Tabla de contenido