Craftsman CMXPTSG1014NB Manual De Instrucciones página 9

ENGLISH
4. Connect the air supply hose to the
male plug. Set the working pressure
at 90 PSI for best tool performance.
NOTICE: Working pressure refers to the
air line pressure set to tool when tool is
under working conditions.
OPERATING
1. Press down on the trigger
the tool.
NOTICE: The tool features an air
regulating knob . The tool speed can
5
be adjusted by turning the air regulator
knob either clockwise or
5
counterclockwise. The maximum tool
speed can be obtained when the
concave line on the knob
horizontally.
When first making contact with the
surface you intend to sand, ensure the
speed is set to the lowest setting.
Gradually increase the power/speed as
needed for your particular sanding
application instead of using too much
power/speed from the start.
8
to start
6
is pointing
5
6
5