Manual Buttonhole - Singer 7258 Manual De Instrucciones

CORDED
BUTTONHOLES
Hook filler cord (such as crochet
thread or buttonhole twist) over the
spur and pull both ends of the cord
forward under the foot and tie off the
cord as shown in the illustration.
Sew buttonhole so that zigzag stitches
cover the cord.
When completed, release the cord
from foot and snip off extra length.

MANUAL BUTTONHOLE

* Use the automatic buttonhole foot up to 1 3/4 "(45 mm) in
length, but don't lower the buttonhole lever or a beep will
sound.
* Use the satin foot to create larger buttonholes.
* Carefully mark the buttonhole length on your garment. Place
the fabric with the buttonhole marked under the buttonhole
foot. Slide the foot forward so that the needle pierces the
fabric at the beginning of the buttonhole.
PROCEDURE
1. Start the machine to form first bartack and left side of
buttonhole.
2. Sew second bartack and stitch backward until needle
reaches beginning of buttonhole.
3. Stitch forward to the end of buttonhole mark to complete
buttonhole.
4. Push the reverse stitch switch to tie off the stitches.
NOTE: If stitch length is manually set at 0.8 (mm) for
step 1, set the stitch length at 0.8 (mm) for step 3 as
well.
68
Spur
Saliente
Tige
1
2
3
4