DURAVIT SensoWash Starck f Plus 612000 Manual De Instrucciones página 13

Check with a qualified electrician or serviceman if the grounding
instructions are not completely understood, or if in doubt as to
whether the product is properly grounded.
This product is for use on a nominal 120 V circuit, and has a
grounding plug that looks like the plug illustrated in sketch A in
Figure 75.1. A temporary adapter, which looks like the adapter
illustrated in sketches B and C, may be used to connect this plug to
a 2-pole receptacle as shown in sketch B if a properly grounded
outlet is not available. The temporary adapter should be used only
until a properly grounded outlet (sketch A) can be installed by a
qualified electrician. The green colored rigid ear, lug, and the like
extending from the adapter must be connected to a permanent
ground such as a properly grounded outlet box cover. Whenever the
adapter is used, it must be held in place by the screw.
Grounded
outlet
Grounding pin
(A)
For units converted into a permanently connected device:
GROUNDING INSTRUCTIONS
This product should be connected to a grounded, metallic,
permanent wiring system, or an equipment-grounding
conductor should be run with the circuit conductors and connected
to the equipment grounding terminal or lead on the product.
FFC Compliance statement
This device complies with part 15 of the FCC Rules. Operation is
subject to the following two conditions:
(1) This device may not cause harmful interference, and
(2) this device must accept any interference received,
including interference that may cause undesired operation.
(B)
Grounded
outlet box
Adapter
Metal screw
(C)
Tab for
grounding screw
EN
11