DURAVIT SensoWash Starck f Plus 612000 Manual De Instrucciones página 29

Problem
LED indications
LED flashes red,
green or orange
or an indication tone
is audible.
General problems
Unit does not work.
Water leakage.
Remote Control
White LED blinks for
3 sec. when RC is in
use.
LED flashes red when
RC is in use.
Remote control does
not work.
Washing functions
Switch between
Rearwash/Ladywash
takes too long.
Water spray intensity
too weak.
Water too warm/cold.
Water spray from the
spray wand suddenly
stops.
Potential cause
Malfunction.
Seat unit is in standby
mode (LED is red).
Malfunction.
The batteries are low.
Remote control is not
connected to the product.
No batteries inserted.
Remote control is defect.
Spray wand moves back
and forward again after
self-cleaning is complete.
Water spray intensity has
been set to low.
Water supply defect.
Function stops
automatically after 2 min.
Seat sensor has lost
contact.
Solution
> Deactivate seat unit.
> Close stop valve.
> Contact Duravit
help@duravit.com.
> Switch on seat unit.
> Close the main valve
for the water supply.
> Disconnect the power
supply.
> Contact
help@duravit.com.
> Change the batteries.
> Contact
help@duravit.com.
> Insert batteries.
> Contact
help@duravit.com.
This is normal.
> Adjust water spray
intensity to medium
or high.
> Contact
help@duravit.com.
> Adjust water
temperature.
This is normal.
> Sit down and select
the function again.
Ch.
5
1.5
5
EN
5
5
6
App
6
App
27