Domo DO7287S Manual De Instrucciones página 31

TELESCOPIC TUBE
1. Put the handle of the hose into the telescopic tube.
2. Set the telescopic tube to the desired length. For this, push the slide on the wand
downwards and pull on the upper part of the wand to extend it. Release the slide button
and let the tube snap into place.
3. Attach the floor nozzle to the telescopic tube by firmly sliding the tube into the nozzle.
1
ACCESSORIES
1. Crevice nozzle: for hard to reach areas like
radiators, crevices, corners, in between
pillows,...
2. Dust brush: for furniture, shelves,...
USE
1. Unwind the cord to a substantial length and plug in the vacuum cleaner. The yellow label
on the cord indicates the maximum length of the cord, that should not be exceeded.
2. To turn the vacuum cleaner on and off, press the foot pedal with the
3. To set the suction power, slide the suction power button upwards or downwards
in between the MIN and MAX indicators. For delicate materials it is best to use the
minimum power level, a medium power is recommended for matresses, furniture and
carpets and the maximum power level should be used for tiles, wood and other hard
floors.
4. When you want to clean hard floors, make sure that the brushes in the floor nozzle are
down.
5. When you want to clean carpet, make sure that the brushes in the floor nozzle are
retracted.
6. When you have finished vacuuming, unplug the vacuum cleaner and automatically
rewind the cord by pressing the foot pedal with the
does not whip back and forth while rewinding the cord, by guiding the cord with your
hand. This to prevent possible damage.
3
2
www.domo-elektro.be
2
6
3
2
symbol.
symbol. Make sure that the plug
5
4
1
31
DO7287S