2.
Adjust the Handle Assembly
Transfer Valve/Valve de transfert/Válvula de transferencia
Accessories
Accessoires
Accesorios
B
A
C
Accessories and Combined Accessories
Accessoires et accessoires combinés
Accesorios y accesorios combinados
Mixed Water Supply
Alimentation d'eau mélangée
Suministro de agua mezclada
Ensure the valve stem adapter is lightly placed over the spline adapter.
Place the handle assembly over the valve stem adapter.
Turn on the water supply to the transfer valve.
Rotate the handle assembly until water begins to flow through the shower
accessory.
Determine the shower accessory that will correspond to the Accessory "A" setting
at the 12 o'clock position on the escutcheon.
Turn the handle to the detent setting that corresponds with Accessory "A." The
handle should be in the vertical 12 o'clock position.
Remove the handle assembly and set aside.
To adjust for handle alignment:
NOTE: The spline adapter allows fine adjustment of the handle alignment.
Remove the handle assembly and the valve stem adapter.
Reposition the spline adapter.
Reinstall the handle assembly and the valve stem adapter.
Check the alignment. Repeat this procedure until the handle alignment is
satisfactory.
Ajuster l'ensemble de poignée
S'assurer que l'adaptateur de la tige de valve soit placée légèrement sur
l'adaptateur à cannelure.
Placer l'ensemble de poignée sur l'adaptateur de la tige de valve.
Ouvrir l'alimentation d'eau à la valve de transfert.
Pivoter l'ensemble de poignée jusqu'à ce que l'eau s'écoule à travers l'accessoire
de douche.
1116348-2-A
Spline Adapter
Adaptateur à cannelures
Adaptador de ranuras
Valve Stem Adapter
Adaptateur de tige de valve
Adaptador de la espiga de la válvula
Handle Assembly
Ensemble de poignée
Montaje de manija
A + C
C
B + C
6
A
A + B
B
Kohler Co.