Veridian Healthcare 01-514 Manual De Instrucciones página 12

TAKING YOUR BLOOD PRESSURE READING
6. The unit will brie y display the last reading value for that
memory bank. If there is no previous measurement, the unit will
display '0' for all of the reading values, Fig 5.
7. The cuff will automatically in ate to approximately 190mmHg or
40 mmHg higher than the last systolic pressure reading stored in
memory.
YOU CAN STOP THE INFLATION OR DEFLATION
PROCESS AT ANY TIME BY PRESSING THE
START/POWER BUTTON.
8. When the in ation has reached optimum level, the display will
begin to show the decreasing pressure while you feel the
pressure of the cuff decrease.
9. When the measurement is complete your blood pressure
measurement and pulse will display simultaneously on the
screen, Fig 6. Both the systolic and diastolic readings will display
at the same time.
10. The Hypertension Indicator will indicate your reading range in
the left side of the display, Fig 7. See page 13 for a chart
interpreting the Hypertension Indicator results.
11. If an irregular heartbeat was detected during the reading, the
Irregular Heartbeat Detector will appear on the display, Fig 7. See
page 13 for more information on the Irregular Heartbeat Detector
feature.
12. The results will automatically be stored in in the memory bank
selected before the measurement, up to 60 readings.
13. Select (START) to turn the unit off and conserve energy and
battery life. The unit will automatically shut-off and revert to
time/date mode after approximately 1 minute.
14. Disconnect the cuff and tubing from the monitor prior to storing.
1 1 2 2 • • E E N N G G L L I I S S H H
Fig. 5
Fig. 6
Fig. 7