Truper SOMU-250X Instructivo página 36

Connection of the electrode into the negative
terminal (–) and the ground clamp into the
positive terminal (+). The work piece
receives higher heat, thus produces
less distortion of the piece and
narrower weld seams,
makes it ideal to
weld thin pieces.
Connection of the ground clamp into the positive
terminal (+) and the torch connection into the
negative terminal (–).
Connect the torch gas inlet (A) to the output valve
in the protection gas regulator.
14 ENGLISH
Weld with SMAW electrode
Interface Home Minimum and maximum parameters of the manual arc process
18 A 77.1 V
Arco Manual
Arco Manual
TIG Weld
Interface Home Minimum and maximum parameters of the manual TIG process
13 A 13.3 V
TIG lift Arc
TIG Lift Arc
Start Up
Connection of the clamp to ground into the negative
terminal (–) and the electrode into the positive
terminal (+). The electrode receives higher heat
producing more penetration with basic
electrode. Makes it ideal to weld
thick pieces .
200 A 77.2 V
0 VRD Cierre 0 VRD Cierre
Arco Manual
0 0
VRD VRD
250 A 13.3 V
TIG lift Arc
A