Programming The Hob; Switching The Hob On And Off; Adjusting The Hotplate - NEFF T4.T.0 Serie Instrucciones De Uso

Programming the hob

Switching the hob
on and off
Notes
Adjusting the
hotplate
To set a heat setting:
This section shows how to adjust a hotplate. The table
gives the settings and cooking times for various
dishes.
Switch the hob on and off using the main switch.
To switch on: touch the # symbol. The indicator
above the main switch lights up. The hob is ready.
To switch off: touch the # symbol until the indicator
above the main switch goes out. All hotplates are
switched off. The residual heat indicator remains on
until the hotplates have cooled down sufficiently.
The hob switches off automatically if all hotplates have
been switched off for more than 15 seconds.
The settings remain stored for 4 seconds after the hob
has been switched off. If you switch it on again during
this time, the hob will operate using the previously
stored settings.
Select the required heat setting using the knob.
Heat setting 1 = minimum
Heat setting 9 = maximum
Each heat setting has an intermediate step. This is
marked with a dot.
The hob must be switched on.
1.
Select the hotplate. To do this, touch the touch
knob in the appropriate area for the desired
hotplate.
47