General Description; Rs825-Rs826; Rs827-Rs829; Rs831-Rs833 - Mopedia RS825 Manual De Instrucciones

7. GENERAL DESCRIPTION

7.1 RS825-RS826

Foldable shower chair in painted steel and HDPE seat. Anti-slip rubber tips (RS826) or wheels
(RS825).

7.2 RS827-RS829

Bath bench with or without backrest, aluminium frame, seat and backrest (if present) in
HDPE. Height adjustable, anti-slip rubber tips.

7.3 RS831-RS833

Bath bench with or without backrest, aluminium frame, HDPE and U-shape seat and HDPE
backrest (if present). Height adjustable, anti-slip rubber tips.

7.4 RS838-RS839

Shower chair with armrests and with or without backrest, aluminium frame, seat and
backrest in HDPE. Height adjustable, anti-slip rubber tips.

7.5 RS908

Support stand. Support to get up from the toilet, made of painted steel, width adjustable
for better adaptability. Padded armrests for better comfort, height adjustable legs, anti-slip
rubber tips.

7.6 RP770

Safety handles for WC.
Realized in anodized aluminum tube, armrests in HDPE. Useful aid to sit and get up from the
toilet. Adaptable to any type of toilet. Height-adjustable legs, antislip rubber tips.

8. ASSEMBLING

8.1 RS825-RS826
1. Open the frame;
2. Lock the frame of the seat on the two front supports;
3. Add the seat strengthening on the surface to lock it with the frame;
4. Insert the backrest inside the frame support tubes;
5. Add the 4 legs (RS826) or wheels (RS825).
8.2 RS827-RS829
1. Reverse the seat, take the two u-shape frames of the legs and tighten them to the center
of the seat using one of the short screws provided;
2. For RS829, take the backrest supports and tighten them to the seat and to the leg
supports using the long screws;
3. For RS829, tighten the backrest to their supports using the remaining short screws;
4. Add the 4 legs and fix them at the desired height.
8.3 RS831-RS833
1. Reverse the seat, take the two u-shape frames of the legs and tighten them to the center
of the seat using one of the short screws provided;
2. For RS833, take the backrest supports and tighten them to the seat and to the leg
supports using the long screws;
3. For RS833, tighten the backrest to their supports using the remaining short screws;
4. Add the 4 legs and fix them at the desired height.
5