Descargar Imprimir esta página

Problems & Solutions - Fisher-Price M8174 Manual De Usuario

Publicidad

Problem
You hear static or buzzing
Reception display on receiver(s) LCD
screen flashes and you hear a low
pitched beep
Receiver(s) LCD screen does not
turn on
Receiver(s) LCD screen indicates low
battery power and you hear a
high pitched beep
Transmitter power indicator does
not light
You can hear conversations or sounds
from other homes
Hint: If, after checking all of these solutions, you believe that your transmitter power cord or AC adaptor are
damaged, please contact Fisher-Price
24
Problems & Solutions
There may be a physical obstruction or noise level causing interference.
Change the location of reciever or try a different channel. Range
varies depending on surrounding conditions such as noise levels, physical
obstructions and signal interference.
Transmitter power is off. Turn transmitter power on.
Transmitter and receiver are on different channels. Change both units to the
same channel.
Loose power cord connection and transmitter power is off. Check
transmitter power cord plug-to-outlet connection.
No power to wall outlet and transmitter power is off. Make sure light switch
that controls power flow to wall outlet is on.
Power is off because circuit breaker for room is off. Make sure house fuses
and circuit breakers are on.
Receiver power is off. Turn receiver power on.
Battery needs to be recharged. Charge the battery for 8 hours. Or, use the
AC adaptor as a power source (and charge the battery at the same time!).
Power is off because circuit breaker for room is off. Make sure house fuses
and circuit breakers are on.
No power to wall outlet and power is off. Make sure light switch that
controls power flow to wall outlet is on.
Battery needs to be recharged. Charge the battery for 8 hours. Or, use the
AC adaptor as a power source (and charge the battery at the same time!).
Transmitter power is off. Turn transmitter power on.
Loose power cord connection and transmitter power is off. Check
transmitter power cord plug-to-outlet connection.
No power to wall outlet and transmitter power is off. Make sure light switch
that controls power flow to wall outlet is on.
Power is off because circuit breaker for baby's room is off. Make sure house
fuses and circuit breakers are on.
There is signal interference due to other nursery monitors on same channel
or cordless telephone use. Change the channel on all units.
.
®
Solution

Publicidad

loading