Special Requirements For Rotary Hammer - Siefken SCHOCK DAMON SDS MAX 1.700w Instrucciones De Uso

Built to Exceed 3 YEARS
L I M I T E D WA R R A N T Y

Special requirements for rotary hammer

1. Wear ear protectors. Exposure to noise can cause hearing loss.
2. Use auxiliary handles, if supplied with the tool. Loss of control can cause personal injury.
3. Hold Power tool by insulated gripping surfaces, when performing an operation where the
cutting accessory may contact hidden wiring or its own cord. Cutting accessory contacting a "live"
wire may make exposed metal parts of the power tool "live" and could give the operator an electric
shock.
4. Wear a dust mask. Do not inhale the harmful dusts generated in drilling or chiseling operation.
The dust can endanger the health of yourself and bystanders.
5. Before beginning work, check the working area (e.g. with a metal detector) to ensure that no con-
cealed electric cables or gas and water pipes are present. Contact with electric lines can lead to re
and electric shock. Damaging a gas line can lead to explosion. Penetrating a water line causes pro-
perty damage or may cause an electric shock.
6. If the supply cord of this power tool is damaged, it must be replaced by a specially prepared cord
available through the service organization.
7. Do not touch the bit during or immediately after operation. The bit becomes very hot during
operation and could cause serious burns.
8. Do not use the power tool with a damaged cord. Do not touch the damaged cord and pill the
plug from the outlet when the cord is damaged while working. Damaged cords increase the risk of
an electric shock.
9.If the supply cord is damaged, it must be replaced by the manufacturer, its service agent or simi-
larly quali ed persons in order to avoid a hazard.
10. Warning: Reduce the working time to avoid risks related with too much vibration.
Residual risks
Even when the power tool is used as prescribed it is not possible to eliminate all residual risk factors.
The following hazards may arise in connection with the power tool's construction and design:
1. Damage to lungs if an e ective dust mask is not worn.
2. Damage to hearing if e ective hearing protection is not worn.
3. Damages to health resulting from vibration emission if the power tool is being used over longer
period of time or not adequately managed and properly maintained.
WARNING! This power tool produces an electromagnetic eld during operation. This eld may
under some circumstances interfere with active or passive medical implants. To reduce the risk of
serious or fatal injury, we recommend persons with medical implants to consult their physician and
the medical implant manufacturer before operating this machine.
5