Siefken SCHOCK DAMON SDS MAX 1.700w Instrucciones De Uso página 27

2. When drilling at "rotation + hammering":
If you switch the function knob during motor rotation, the tool can start to rotate abruptly, resul-
ting in unexpected accidents. Be sure to switch the function knob when the motor is at a complete
stop.
(1) Switching to "rotation + hammering"
Turn the function knob clockwise. Align
in Fig.5
(2) Mount the drill bit.
(3) Pull the trigger switch3 after applying the drill bit tip to the drilling position Fig.6
(4) Pushing the rotary hammer forcibly is not necessary at all. Pushing slightly so that drill dust
comes out gradually is su cient.
CAUTION: Although this machine is equipped with a safety clutch, if the drill bit becomes bound in
concrete or other material, the resultant stoppage of the drill bit could cause the machine body to
turn in reaction. Ensure that the main handle and side handle are gripped rmly during operation.
3. When chipping and chiseling at "hammering":
CAUTION:
If the function knob is switched during motor rotation, the tool can start to rotate abruptly, resul-
ting in unexpected accidents. Make sure to switch the function knob when the motor is at a com-
plete stop.
If the tine chisel or at chisel is used at the position of "rotation hammering", the tool can start to
rotate, resulting in unexpected accidents. Make sure that they are used at the position of "hamme-
ring".
(1) Switching to "hammering"
Turn the function knob counterclockwise. Align
illustrated in Fig.7
2)When xing working positions of at chisel such as cold chisel, etc.,
(a) Turn the function knob, Align
(b) Fix the at chisel to the desired working direction in Fig. 9.
(c) Switch the selector lever to "hammering" according to the procedures mentioned in the above
item (1) and secure the position of the tool.
Built to Exceed
of the function knob and
of the function knob and
3 YEARS
of the cover as illustrated
of the function knob and
of the cover as illustrated in Fig.8.
L I M I T E D WA R R A N T Y
of the cover as
10