cecotec HidroBoost 1600 Car&Bike Manual De Instrucciones página 26

Ocultar thumbs Ver también para HidroBoost 1600 Car&Bike:
Tabla de contenido

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

  • MEXICANO, página 6
ENGLISH
ACCESSORIES:
3D TURBOFLIP NOZZLE
A turbo nozzle, sometimes referred to as a rotary nozzle, is a very effective accessory that can
significantly reduce cleaning time. This is the accessory that must be attached to use the turbo
mode explained in the before section.
SOAP BOTTLE
This model includes an accessory to apply soap while using the device. The use of soaps can
dramatically reduce cleaning time and assist in the removal of difficult stains. Some soaps
have been customized for pressure washer use on specific cleaning tasks. The use of thicker
soaps, such as dish soap, will clog the chemical injection system.
NOTE: Soaps work best when applied at low pressure with the spray mode.
The combination of chemical action and high-pressure (with the focused mode) rinsing is
very effective. On vertical surfaces, apply the soap starting at the bottom and work your way
upward. This will prevent the soap from sliding down and causing streaks. High pressure
rinsing should also progress from the bottom to top. On particularly tough stains, it may be
necessary to use a brush in combination with soaps and high-pressure rinsing. Follow the
instruction on the following section to use this accessory.
ANTI-IMPURITIES FILTER
This model includes a transparent male connector with an anti-scale filter to which the hose is
connected, preventing scale from building up.
360BRUSH
This model includes a special brush for cleaning car wheels, which is made of hard bristles
capable of removing the most difficult dirt. When this accessory is installed and used, water
will automatically come out with low pressure, spray mode.
EASYCLEAN BRUSH
This model also includes a cleaning brush that, combined with water and soap, help removing
stains and allow a more efficient cleaning. When this accessory is installed and used, water
will automatically come out with low pressure in spray mode.
CLEANING PROCESS
1. Surface preparation
Clean the area of furniture and make sure all windows and doors are closed tight. Also, make
sure that all plants and trees near the cleaning area are protected by a drop cloth.
26
HIDROBOOST 1600 CAR&BIKE

Hide quick links:

Publicidad

Tabla de contenido
loading

Tabla de contenido