To Erase The Memory - Craftsman SMART CONTROL Manual Del Propietário

To Erase the Memory

ERASE ALL REMOTE CONTROLS AND KEYLESS ENTRIES
1. Press and hold the LEARN button on garage door opener until
the learn LED goes out (approximately 6 seconds). All remote
control and keyless entry codes are now erased. Reprogram
any accessory you wish to use.
ERASE ALL REMOTE CONTROLS, KEYLESS ENTRIES AND
SMART CONTROL DEVICES FROM GARAGE DOOR OPENER
1. Press and hold the LEARN button on garage door opener until
the learn LED goes out (approximately 6 seconds).
2. Immediately press and hold the LEARN button again until the
learn LED goes out. All codes are now erased. Reprogram any
accessory you wish to use.
ERASE THE CONNECTION FROM GARAGE DOOR OPENER TO
HOME Wi-Fi NETWORK
1. Press and hold the black adjustment button on the garage
door opener until 3 beeps are heard (Approximately 6
seconds).
ERASE A SMART CONTROL ACCOUNT
1. Go to setupsmartgdo.craftsman.com to access your account.
2. Go to "Account" section.
3. Click "Delete Account".
Go to smartgdo.craftsman.com for more details.
40