Changing The Language Setting - Sony HDR Serie Guía De Operaciónes

To turn off the power
 Close the LCD screen.
 If the viewfinder is pulled out, retract the viewfinder as shown in the illustration below
(HDR-CX700/CX700V).
The (Movie) lamp flashes for a few seconds and the camcorder is turned off.
Tips

You can turn off the camcorder also by pressing POWER.

When [Power On By LCD] is set to [Off], turn off your camcorder by pressing POWER

(HDR-CX560/CX560V).
On turning the camcorder on or off using the LCD screen or the viewfinder
(HDR-CX700/CX700V)
The power of the camcorder is turned on or off depending on the status of the LCD screen or
the viewfinder.
Status
LCD screen
Open
Closed

Notes
Even if the LCD screen is closed, if the viewfinder is pulled out, the camcorder is not turned off. When

you turn off the power of the camcorder, make sure that the viewfinder is retracted to the original
position.

Changing the language setting

You can change the on-screen displays to show messages in a specified language.
(MENU)  [Setup]  [
Touch
desired language 
US
0
Power of the
camcorder
Viewfinder
Retracted
Pulled out
Retracted
Pulled out
 
On
On
Off
On
(General Settings)]  [Language Setting]  a
.