5.7 Connecting to the control panel
For the electrical connection procedures, use the junction box and branching boxes.
Connecting the 230V a.c. delayed closing gearmotor
ZA3N Control panel
Connecting the 230V a.c. delayed opening gearmotor
Power
230V a.c. - 50/60 Hz
5.8 Outward opening installation
A
B
E
Opening
(mm)
(mm)
(mm)
90°
130
130
720
Weld the extra bracket to that of the pillar, secure the extra
bracket to the pillar making sure the A and B quotas are
met as shown in the table.
Open the gate to a 90° arc, weld or secure using proper
screws the gate bracket making sure the E quota is met.
Secure the gearmotor to the brackets.
Extra bracket