Attaching/Detaching the Lens
≥ Refer also to the camera's owner's manual for
attaching and detaching the lens.
∫Attaching the Lens
≥ Check that the camera is turned off.
1 Turn the lens rear
cap to detach it.
A: Lens Rear Cap
2 Align the lens fitting
marks B on the camera
body and the lens and
then rotate the lens in
the direction of the
arrow until it clicks.
• Do not press the lens release button C when
you attach a lens.
• Do not try to attach the lens when holding it at an
angle to the camera body as the lens mount may
get scratched.
• Check that the lens is attached correctly.
• Be sure to remove the lens cap when recording.
8
SQT0454 (ENG)
∫ Detaching the Lens
≥ Check that the camera is turned off.
Press the lens release
button C while turning
the lens as far as
possible in the direction
of the arrow to detach it.
• Attach the lens rear cap so
that the lens contact point does not get
scratched.
• Attach the body cap to the camera so no dirt or
dust will get inside the main unit.