Lotus ILMOS10 Manual De Instrucciones página 8

USING THE CHRONOGRAPH
This chronograph is able to measure and display time in 1/1 second united up to maxinum of
59 minutes 59 seconds.
The chronograph second hand keeps continuously for 59 minutes 59 seconds after starting.
[Measuring time with the chronograph]
1. The chronograph can be started and stopped each time button "A" is pressed.
2. Pressing button "B" resets the chronograph and the chronograph second hand and
chronograph minute hand return to zero position.
A
RESET
MEASUREMENT
ILM OS1 0
A
TIME
STOP
A
B B
12
ILMOS1 0
CHRONOGRAPH RESET
(incl. after replacing battery)
This procedure shoud be performed when the chronograph second hand does not return
to zero position after the chronograph has been reset, and including after the battery has
been replaced.
1. Pull the crown out to the 2nd position.
2. Press button "A" to set the chronograph second hand to the zero position.
The chronograph hand can be advanced rapidly by continuously pressing button "A".
3. Once the hand have been zeroed, return the crown to the normal position.
* Do not push crown to normal position while the chronograph second hand returns
to zero position. It stops on the way when crown are returned to normal position and its
position is recognized as zero position.
13