Maintenance; General Maintenance - RIDGID MEGAMax R86400 A serie Manual Del Operador

MAINTENANCE

WARNING:
When servicing use only identical replacement
parts. Use of any other parts can create a hazard
or cause product damage.

GENERAL MAINTENANCE

Avoid using solvents when cleaning plastic parts. Most
plastics are susceptible to damage from various types of
commercial solvents and may be damaged by their use. Use
clean cloths to remove dirt, dust, oil, grease, etc.
WARNING:
Do not at any time let brake fluids, gasoline,
petroleum-based products, penetrating oils, etc.,
come in contact with plastic parts. Chemicals can
damage, weaken or destroy plastic which can
result in serious personal injury.
NOTE: ILLUSTRATIONS START ON PAGE 10
AFTER FRENCH AND SPANISH LANGUAGE SECTIONS.
This product has a 90-Day Satisfaction Guarantee Policy, as well as a
Three-year Limited Warranty. For Warranty and Policy details, please go to
www.RIDGID.com or call (toll free) 1-866-539-1710.
REPLACING THE DRIVE GEAR COVER
See Figure 5, page 11.
If over time you notice the noise of the tool getting louder
than usual, check the condition of the drive gear cover. If
it is excessively damaged so that the metal gear is clearly
visible, the drive gear cover needs to be replaced. Contact
customer service to obtain a replacement drive gear cover.
NOTE: To reduce the noise level of the tool, do not operate
without the drive gear cover installed.
8 - English