Bushnell Fusion 1 Mile ARC Manual Del Usuario página 12

TIP: While pressing the POWER button, you can move the device slowly from object to object and intentionally force
the laser to hit multiple objects to ensure that you are only displaying the closest of the objects recognized by the laser.
Brush
™ (Display Indicator - ) This advanced mode allows objects such as brush and tree branches to be ignored
so that distance only to background objects are displayed. When more than one object has been acquired, distance of
the further object will be displayed and a circle will surround the Brush™ indicator informing the user that distance
of the farthest object is being displayed.
Once in this mode, press the POWER button to turn the unit on. Next, align the aiming circle onto the object that
you want distance to. Next, press and hold the POWER button and move the laser slowly over the object until a circle
surrounds the Brush indicator. If the laser beam recognized more than one object (i.e. close-up tree branch and a deer
in the background), distance of the further object (i.e. deer) will be displayed and a circle will surround the brush
indicator informing the user that distance to the farther object is being displayed (Figure 2). There may be times when
only the laser beam only sees one object in its path. In this case, the distance will be displayed, but because more than
one object was not acquired, the circle will not surround the Brush indicator.
Figure 2
TIP: While pressing the POWER button, you can move the device slowly from object to object and intentionally
12