Bushnell Fusion 1 Mile ARC Manual Del Usuario página 14

and hold the MODE button for three seconds to get into the SETUP menu. The brightness is displayed first and
can be changed by pressing the MODE button or accepted by pressing the POWER button. Then press the power
button until you see the existing compensation mode indicated by either the "Bow" symbol ( ), the "Rifle" symbol
( ) lit with one of the ballistic groups (A thru J) displayed and flashing, or no indicators lit and the message
(ARC OFF) flashing.
The modes can be cycled through in a circular fashion by pressing and releasing the mode button. The order of modes
is a follows: BOW, RIFLE A, RIFLE B, RIFLE C, RIFLE D, RIFLE E, RIFLE F, RIFLE G, RIFLE H, RIFLE I,
RIFLE J, REG, etc. When the bow selection is displayed, the "BOW" icon will flash and when a "RIFLE: selection
is displayed, the "RIFLE" icon and ballistic group will be flashing. When the (ARC OFF) is displayed, the message (ARC
OFF) will flash within the display.
Once the desired distance compensation mode is displayed, select it by pressing and releasing the POWER button.
Following this selection, the current unit of measure, "Y" for yards or "M" for meters will flash in the display and the
SETUP icon is still lit. Pressing the MODE button will toggle the unit of measure. When the desired unit of measure
is displayed, press the POWER button to accept the unit of measure.
If the user chooses RIFLE mode, and after having determined unit of measure, the user has the following options:
1. Variable Sight-In (VSI™) - Allows the rifle hunter to choose from four sight-in distances (100, 150, 200, or 300
yards or meters) and provides holdover / bullet-drop data in inches, centimeters, MOA or MIL. The "SD" (Sight-In
Distance) indicator will turn on and the current Sight-In Distance number will blink within the display (I.e. 100,
150, 200, or 300). The Sight-In Distance options can be cycled through in a circular fashion by pressing and releasing
the mode button. Once the desired Sight-In Distance is displayed, select it by pressing and releasing the power button.
2. And finally, if RIFLE mode was chosen, and as long as unit of measure and a sight-in distance was selected, you
14