Handsfree Calling - Sony MEX-BT4050U Manual De Instrucciones

Handsfree calling

Once the unit is connected to the cellular
phone, you can make/receive handsfree
calls by operating this unit.
Before handsfree calling, check the
following:
 Make sure that " " and " " appear in
the display.
 If " " and " " do not appear, perform
the connection procedure (page 21).
 If you cannot connect this unit and the
cellular phone via the Bluetooth
function, perform the pairing procedure
(page 20).
Receiving calls
When receiving a call, a ringtone is output
from your car speakers or the connected
cellular phone. The caller's name or phone
number appear in the display.
1
Press (handsfree) when a call is
received with a ringtone.
The phone call starts.
Notes
• Depending on the cellular phone, the caller's
name may appear.
• The built-in microphone of this unit is located
on the inner panel (page 9). Do not cover the
microphone with tape, etc.
Rejecting a call
Press and hold  for 1
second.
Ending a call
Press (handsfree) again.
Calling from the phonebook
You can make a call from the phonebook in
this unit (internal phonebook) or the
cellular phone*.
For details on how to transfer the
phonebook data of a cellular phone into this
unit, see "Internal phonebook" (page 25).
* To access the cellular phone's phonebook from
this unit, the cellular phone must support PBAP
(Phone Book Access Profile).
1 Press  and rotate the control
dial until "PHONEBOOK" appears,
then press it.
The phonebook which has priority
appears. The default setting is the
cellular phone ("CEL").
2
Rotate the control dial to select an
initial from the initial list, and then
press it.
3
Rotate the control dial to select a name
from the name list, and then press it.
4
Rotate the control dial to select a
number from the number list, and then
press it.
The phone call starts.
Note
Depending on the cellular phone, contacts
displayed on the unit may differ from the
phonebook of the cellular phone.
Changing the phonebook priority
Press  and rotate the control dial
1
until "PH BOOK SEL" appears, then press
it.
2
Select "CEL (cellular phone)" or "HU (this
unit)" to set the priority.
Note on phonebook data
Prior to disposal or changing ownership of your
car with this unit still installed, be sure to
initialize all the Bluetooth related settings in this
unit to prevent possible unauthorized access
(page 27).
23