Dometic PerfectWall PW3500 Instrucciones De Uso página 41

PW3500
6.4 Testing the wind sensor
!
WARNING!
z The wind sensor is a safety-related part. Malfunctioning of the
wind sensor can lead to fatality or serious injury, as well as se-
rious damage to your vehicle.
z Test the wind sensor before each journey and at regular inter-
vals.
z Do not change any settings on the wind sensor. A change in
the default settings can cause the wind sensor to malfunction
and lead to fatality and serious injury, as well as serious dam-
age to your vehicle.
I
NOTE
Any change made to the default setting will invalidate the
warranty.
To test the wind sensor, proceed as follows:
➤ Briefly press the
✓ The awning extends all the way.
➤ Move the front cover (fig. 4 1, page 2) for about 8 seconds approx. 75 to
100 mm repeatedly back and forth to simulate vibrations from the wind.
✓ The awning retracts automatically all the way.
If the awning does not retract automatically
➤ Check the battery status of the wind sensor and replace if necessary, see
chapter "Changing the batteries in the wind sensor" on page 42.
➤ Test the wind sensor again.
➤ If the wind sensor does not work and the awning does not retract
automatically, reprogram it, see chapter "Reprogramming the wind
sensor" on page 45.
➤ Test the wind sensor again.
➤ If the wind sensor does not work after reprogramming, contact your
service partner.
EN
button.
Operating the awning
41