Dometic PerfectWall PW3500 Instrucciones De Uso página 49

PW3500
Step 5: Set the outer limit
➤ Keep pressing the
correct outer limit.
The fabric should lie loosely on the arms. Later on the back impulse after
extending the awning will apply the tension to the fabric.
I
NOTE
When you press a button for longer than 3 seconds, the awning
will keep moving even if you release the button. Briefly press the
button to stop the awning in the desired position.
Step 6: Complete the programming
➤ Press the
retract.
➤ Briefly press the
✓ The awning stops.
➤ Press and hold down the
briefly.
➤ Press the programming button (fig. 3 1, page 2) on the back of the
remote control.
✓ The awning briefly moves twice, indicating that the programming is
completed. Now it can be retracted and extended again by pressing the
and
➤ Reprogram the wind sensor, see chapter "Reprogramming the wind
sensor" on page 45.
➤ To check the awning function, see chapter "Retracting the awning" on
page 40 and chapter "Extending the awning" on page 39.
EN
or buttons until the awning moves to the
and buttons simultaneously until the awning starts to
button.
button again until the awning moves twice
buttons briefly.
Adjusting the awning
49