Symbols - Homelite UT10540 Manual Del Operador

Some of the following symbols may be used on this product. Please study them and learn their mean-
ing. Proper interpretation of these symbols will allow you to operate the product better and safer.
SyMBOL
Safety Alert
Read The Operator's
Manual
Wear Eye, Hearing, and
Head Protection
SAFE-T-TIP
No Smoking
Operate With Two Hands Hold and operate the saw properly with both hands.
One Handed
Carbon Monoxide
Kickback
Bar Nose Contact
Wear Gloves
Gasoline and
Lubricant
Keep Bystanders Away

SyMBOLS

NAME
Precautions that involve your safety.
To reduce the risk of injury, user must read and understand
operator's manual before using this product.
Wear eye protection which is marked to comply with
ANSI Z87.1 as well as hearing and head protection when
operating this equipment.
The SAFE-T-TIP
Nose Guard
®
kickback.
No smoking, sparks, or open flame.
Do not operate the saw using only one hand.
Engines produce carbon monoxide which is an odorless,
deadly poison. Do not operate in an enclosed area.
DANGER! Beware of kickback.
Avoid bar nose contact.
Wear non-slip, heavy-duty protective gloves when handling
the chain saw.
Use unleaded gasoline intended for motor vehicle use with
an octane rating of 87 [(R + M)/2] or higher. This product
is powered by a 2-cycle engine and requires pre-mixing
gasoline and 2-cycle lubricant.
Keep all bystanders and animals at least 50 ft. away.
Page 6 — English
DESIGNATION/EXPLANATION
nose guard on the guide bar helps prevent
®