Zyxel NBG334W Manual Del Usuario página 9

3.5 WAN MAC Address
A MAC address is a number which uniquely identifies a device on any network. Set the
WAN port's MAC address by either using your device's factory assigned default MAC
address or cloning the MAC address of a computer on your LAN. By default, the
NBG334W uses the factory assigned MAC address to identify itself on the WAN.
• Select Factory Default to use the factory-assigned, default MAC address.
• Select Clone the Computer's MAC Address to clone the MAC address from a computer
on your LAN. Type the IP address of the computer with the MAC address you are cloning.
It is advisable to clone the MAC address from a computer on your LAN even if your ISP
does not presently require MAC address authentication.
• Select Set WAN MAC Address if you know the MAC address you want to use.
3.6 Bandwidth Management
Select Enable BM for all traffic automatically to have the NBG334W prioritize data traffic
according to the its use. For example, video streaming may have higher priority than email.
Leave unchecked if unsure. Click Next.
3.7 Setup Complete
1 Click Apply to save your changes in the next screen that appears in the wizard.
ENGLISH
9